Loading... Please wait...

Titebond Panel & Foamboard Construction Adhesive

  • Image 1
0.00 LBS

Product Description

Designed for bonding foamboard insulation and polystyrene to most porous building materials. It is also ideal for use on paneling, plastics, tub surrounds, wood, fiberglass, drywall, ceramic tile, metal and more. It exceeds the performance requirements of the AFG-01 and ASTM C557specifications.

Exceeds the performance requirements of the APA's AFG-01, ASTM C557 and CAN/CGSB-71.25 specifications.

Product Features

  • Extremely versatile - bonds most common building materials
  • Permanently flexible

Physical Properties

Type Synthetic elastomeric polymer Calculated VOC 310 g/L
State Medium-viscosity mastic Weight/gallon 10.0 lbs.
Color Tan Flashpoint < 0°F.
Solids 74% Freeze/thaw stability Will not freeze
Viscosity 130,000 cps Storage life 18 months in tightly closed containers at 75°F.


Coverage (maximum): Approximate length of bead according to bead diameter
Container 1/8” bead 1/4” bead 3/8” bead
10.5 oz. Cartridge 129 ft. 32 ft. 14 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.


Application Guidelines

Application Temperature 0°F. to 100°F.

Service Temperature Range -20°F. to 120°F.

Method of Application Cartridge/caulking gun

Working Time Approximately 10-20 minutes for a 1/4" bead

Working Surfaces Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply mastic to panel perimeters and on 16-inch centers or a criss-cross pattern to ensure maximum adhesion. Temporary bracing or nailing may be needed to improve contact until adhesive dries. Allow to cure overnight for maximum strength.

Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.


Titebond Panel & Foamboard is not designed for continuous submersion. Do not apply to polystyrene foam if temperature is 90°F. or greater. Do not apply over wallpaper. Do not adhere one non-porous material to another since this will slow or prevent drying and damage plastic or foam surfaces.

Caution Statements

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and isopropyl alcohol. Do not use near heat, sparks & flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse health effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN. WARNING: This product contains small amounts of toluene, a chemical known to the state of California to cause birth defects or other reproductive harm.

Ordering Information

Part No.



Units Per Package

Packages Per Pallet


29 Oz. Cartridge





Download MSDS (Material Safety Data Sheet)

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!